Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 56)

or
MENU 1 screen
HOME
screen
MENU 2
screen
Press
Press
Press
Press
Press
+1% ~ +100%
-1% ~ -100%
Wheel operation
Mild
(Negative side) Quick
(Positive side)
Wheel operation
Ser
v
o
tr
a
v
el
Ver tical cursor moves in step
with steering wheel operation.
1
When you want to quicken steering operation, use the (+)
button to adjust the + side. When you want to make steer-
ing operation milder, use the (-) button to adjust the - side.
Steering EXP adjustment
The steering EXP adjustment can be controlled with digital trim DT1~DT6 or digital
dial DL1 etc. with the function select dial function. (p.101)
Dial / Trim Setting
Adjustment buttons
Adjust with the (+) and (-) buttons.
- Return to the initial value "0" by pressing the (+) and (-)
buttons simultaneously for about 1 second.
Adjustment range
-100~0~+100%
Setup item
Rate: Steering EXP rate
When the setting item "Quick or mild" is selected and the
(JOG) button is pressed when the rate is other than "0",
quick/mild are reversed.
2
When ending setting, return to the curve screen by pressing the (END) button.
56
Fu
n
c
tio
n
Steering curve (EXP)
Steering curve (EXP) (Steering system)
This function is used to change the sensitivity of the steering servo around the neutral posi-
tion. It has no effect on the maximum servo travel.
When the setting is not determined, or the characteristics of the model are unknown,
start with 0%. (When EXP is set to 0%, servo movement is linear.)
Racers Tip
Pre Press