Futaba 4PX 2.4GHz FASST T-FHSS S-FHSS - Manual (Page 53)

Brake2 Brake2 Brake3 Brake3 Brake2 & 3 Brake2 & 3
53
Fu
n
c
tio
n
Acceleration (Throttle Acceleration)
(Preparation)
- Select the setting item "Forward" by (JOG) button up or down
operation and make the following adjustments:
1
(Forward acceleration amount adjustment)
Use the (+) and (-) buttons to adjust the acceleration amount.
"0" :No acceleration
"100" :Maximum acceleration (Approximately 1/2 of the forward side throttle angle)
2
(Brake side acceleration amount adjustment)
Select the setting item "Brake1" by (JOG) button up or down
operation and use the (+) and (-) buttons to adjust the accel-
eration amount.
"0" :No acceleration
"100" :Maximum acceleration (Brake side maximum throttle angle)
3
(3rd & 4th channel brake side acceleration amount adjustment)
If the "Brake Mixing Function" (p.80) is being set, the 3rd or 4th
channel brake side acceleration will become adjustable.
Select the setting item "Brake 2" or "Brake3" by (JOG) button
up or down operation and adjust acceleration amount by (+) or
(-) button.
"0" :No acceleration
"100" :Maximum acceleration (Brake side maximum throttle angle)
Throttle acceleration adjustment
The throttle acceleration adjustment amount (Forward), (Brake1), 3rd channel and 4th
channel (Brake2, Brake3) can be controlled with digital trim DT1-DT6 or digital dial
DL1 etc. with the function select dial function. (p.101)
Dial / Trim Setting
Adjustment buttons
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "0" by
pressing the (+) and (-) buttons
simultaneously for about 1 sec-
ond.
Forward acceleration amount
(Forward)
0~100
Initial value: 0
Brake side acceleration amount
(Brake1)
0~100
Initial value: 0
3rd /4t h c h a n n e l b r a k e s i d e
acceleration amount
(Brake2),(Brake3)
0~100
Initial value: 0
When Trigger Ratio (p.66) was set to 100:0, brake operation is stopped and the throttle
(brake side) cannot be adjusted.
Caution
4
When ending setting, return to the menu screen by pressing the (END) button.