Cabletron Systems HSIM-W6 User Manual
Page 99
Chapter 6: HSIM-W6 Configuration with QuickSET
HSIM-W6 User’s Guide
85
The following section defines the field in the Wide Area PPP Time Slot configuration window.
Time Slots —
A full line consists of 24 Time Slots (T1, D1) or 31 Time Slots (E1), each capable
of up to 64 Kbps throughput. Using the PPP Protocol, up to 24 interfaces (T1, D1) or 31 interfaces
(E1) can be assigned to the WAN link. Using the pull-down menu to the right of each Time Slot
field, select the interface number that you wish to assign to the Time Slot.
Once the PPP Time Slot configuration is complete, click on Next>> in the PPP Time Slot
configuration window and proceed to the
Bridging and Routing Configuration
NOTE
If you are configuring a WPIM-DI Time Slot table, any available Time Slots that are not
set to “0” will be mapped to the DI Interface. In other words, If you lease an entire T1
line, any Time Slots that are not used in the Time Slot configuration window are used
by the device connected to the DI interface.
NOTE
The interface numbers available in the pull-down menu are assigned in the WAN (T1,
E1, DI) configuration window. Selecting the Add Interface button or the Delete
Interface button allows you to add or delete available interface numbers from each
pull-down menu.