Cabletron Systems HSIM-W6 - Manual (Page 108)

Chapter 6: HSIM-W6 Configuration with QuickSET
94 HSIM-W6 User’s Guide
Bridging and Routing (WAN Frame Type) Configuration Window
The second Bridging and Routing (WAN Frame Type) window shown in Figure 33 displays after
clicking on the Next>> button at the bottom of the first Bridging and Routing configuration
window. This window is used to select a WAN frame type for each interface.
Figure 33 Bridging and Routing Configuration Window
The Bridging and Routing window displays fields for each interface number and its associated
WAN Frame type. Select the WAN Native frame type for router-to-router communication. Select
the Encapsulated Ethernet or Encapsulated Ethernet Sub-Network Access Protocol (SNAP) frame
types for router-to-bridge or bridge-to-bridge communication.