Cabletron Systems HSIM-W6 - Manual (Page 73)

HSIM-W6 User’s Guide 59
6
HSIM-W6 Configuration with QuickSET
This chapter provides step-by-step instructions for configuring the HSIM-W6 through the use of
QuickSET.
\
Normally, QuickSET automatically establishes a communication link with the HSIM-W6 being
configured. However, under certain circumstances, QuickSET may not be able to automatically
locate the HSIM-W6. In this case, the window shown in
Figure 16 displays:
Figure 16 IP Address Window
Enter the IP address of the HSIM-W6 in the appropriate field and the password if applicable (the
default password is public). Click on the OK button and QuickSET should now locate the
HSIM-W6 on the network and display the First Introductory window shown in
Figure 17 .
NOTE
Before configuring the device, you must set up your computer based on the READ ME
FIRST! documentation included with the product and installed the HSIM-W6 based on
the
QuickSTART Guide located in the QuickSET CD case.
The HSIM-W6 must have at least one WPIM installed before you can begin
configuring the device.