Cabletron Systems HSIM-W6 - Manual (Page 78)

Chapter 6: HSIM-W6 Configuration with QuickSET
64 HSIM-W6 User’s Guide
System Passwords Window
The System Passwords window shown in Figure 21 displays after clicking on the Passwords...
button in the HSIM configuration window. The system passwords used by QuickSET are the same
as the community names of the device that are used in Local Management through a TELNET
application. System passwords allow you to control management access by establishing three
passwords. Each password controls varying levels of access to HSIM-W6 management.
Once passwords are assigned, you must use the super-user system password at the User Password
prompt when initiating a QuickSET session. If you are configuring the HSIM-W6 for the first time
or if no passwords were assigned, the default system password for each access level is preset to
public.
Figure 21 System Passwords Window