Cabletron Systems HSIM-W6 - Manual (Page 169)

Chapter 7: General Configuration Using Local Management
HSIM-W6 User’s Guide 155
IPX General Configuration Screen
The IPX General Configuration screen allows you to configure the HSIM-W6 for IPX routing.
Access the IPX General Configuration screen by using the arrow keys to highlight the IPX
General Config option and then pressing ENTER. The IPX General Configuration screen, shown
in
Figure 64 displays.
Figure 64 The IPX General Configuration Screen
IPX General Configuration Status Fields
The following list describes each of the IPX General Configuration status fields. The status fields
are for informational purposes only and cannot be modified.
Router Name — Displays the type of routing used.
Status — Displays the status of IP Routing.
UpTime — Displays the amount of time elapsed since the last time the HSIM-W6 was rebooted.
Version — The version number of the IP Routing used on the HSIM-W6.
Router Name: IPX
IPX Routing: ENABLED
UpTime: 0 days 0 hours 39 min
SAVE RETURN
IPX General Configuration
Version: XX.XX.XX
Status: Enabled
AdminStatusTime: 0 days 0 hours 39 min
System Level Setup
Port Level Setup
Port: 1
MAC Address: 00-00-1D-22-46-B0
Oper Status: Enabled
Description: Ctron HSIM-W6 EnetPort
Interf. Type: ethernet-csmacd
Framing: Novell MTU: 1500
IPX Address:
IPX Forwarding: DISABLED
+PORT-
IPX Routing: DISABLED
HSIM-W6 Local Management Flash Image Version XX.XX.XX