Cabletron Systems HSIM-W6 - Manual (Page 113)

Chapter 6: HSIM-W6 Configuration with QuickSET
HSIM-W6 User’s Guide 99
Remote MAC Address — Displays the remote Ethernet MAC address. Use this field to enter the
remote MAC address of the device on the other end of the WAN link.
Apply Changes — Use this button to add the configured Host Map entry to the IPX Host Map
list.
Add Host/Delete Host — These buttons allow you to add or delete a host and to configure the
HSIM-W6 to forward only those packets from the specified host. Use these buttons to add or
delete an entry in the Host Map.
Click the OK button to exit the Host Map window and return to the (IP/IPX) Routing
Configuration window.
Once your HSIM-W6 configuration is complete, click on the Save button to save any configuration
changes you made. The Congratulations window displays. Click on the OK button to exit
QuickSET.