Cabletron Systems HSIM-W6 - Manual (Page 44)

Chapter 4: Planning for HSIM-W6 ISDN Configuration
30 HSIM-W6 User’s Guide
Collect Network Information
Before you begin, you need to obtain information about the network to which you are adding the
HSIM-W6. Some of the information is obtained from your central site or remote site network
administrator. Other information is obtained from your ISDN service provider.
You must define the name and security password of the HSIM-W6, ISDN line information and the
Ethernet LAN IP and/or IPX address. You need to identify all of the remote routers and their
routing and bridging capability, ISDN phone numbers, addressing and security information. You
also need to decide whether you will use Internet Firewall Filtering if you are using IP routing. The
following sections contain diagrams and tables to help you gather and organize the information.
Names and Passwords
You must choose a name for the HSIM-W6 and the authentication password, both of which are
used by a remote site to authenticate the target router. For each remote router, you must have the
router name and its authentication password which is used by the HSIM-W6 to authenticate the
remote router. The name and password are used in both PAP and CHAP authentication.
Figure 3
shows how this information is used.
Figure 3 PAP Authentication
SYSTEM NAME = CHICAGO
SYSTEM PASSWORD = ABC
REMOTE ROUTER DATABASE
REMOTE = NEW YORK
PASSWORD = XYZ
NEW YORK AND XYZ
ACCEPTED/REJECTED
CHICAGO
PAP AUTHENTICATION
NEW YORK
SYSTEM NAME = NEW YORK
SYSTEM PASSWORD = XYZ
REMOTE ROUTER DATABASE
REMOTE = CHICAGO
PASSWORD = ABC
194408