Cabletron Systems HSIM-W6 - Manual (Page 192)

Chapter 8: MIB Navigator
178 HSIM-W6 User’s Guide
su:
Syntax: su [community name]
Description: The su command enables you to change your community name to allow
for different access to the MIB. The community name that you enter
allows you either read-only, read-write, or super-user access to that
device’s MIBs, depending on the level of security access assigned the
password through the SNMP Community Names screen. Refer to the
SNMP Community Names Screen section in Chapter 7 for more
information about community names.
Options: Not Applicable
Example:
MIBNav-> su public
051464