Cabletron Systems HSIM-W6 - Manual (Page 97)

Chapter 6: HSIM-W6 Configuration with QuickSET
HSIM-W6 User’s Guide 83
If you have leased a portion of a fractional line (T1 or E1), the service provider tells you which
Time Slots are allocated for your use. In this case select only those Time Slots.
Once the Frame Relay Time Slot configuration is complete, click on Next>> in the Frame Relay
Time Slot configuration window and proceed to the
Bridging and Routing Configuration
section.
NOTE
If you are configuring a WPIM-DI Time Slot table, any available Time Slots that are not
checked are mapped to the DI Interface. In other words, if you lease an entire T1 line,
any Time Slots that are not selected in the Time Slot configuration window are used by
the device connected to the DI interface.