Cabletron Systems HSIM-W6 - Manual (Page 145)

Chapter 7: General Configuration Using Local Management
HSIM-W6 User’s Guide 131
4. Use the arrow keys to highlight the SAVE command field.
5. Press ENTER. The Event Message field at the top of the screen displays “SAVED OK”.
SNMP Community Names Screen
This section explains how to assign community names. Community names allow you to control
Local Management access by establishing three passwords. Each password controls varying levels
of access to HSIM-W6 Local Management.
Access the SNMP Community Names screen, shown in Figure 55 , from the Setup Menu screen
by using the arrow keys to highlight the SNMP Community Names option and pressing ENTER.
The SNMP Community Names screen displays.
Figure 55 The SNMP Community Names Screen
SNMP COMMUNITY NAMES
Community Name
public
public
public
Access Policy
read-only
read-write
super-user
SAVE RETURN
2012_05
HSIM-W6 Local Management Flash Image Version: XX.XX.XX