Cabletron Systems HSIM-W6 - Manual (Page 216)

Chapter 9: Troubleshooting
202 HSIM-W6 User’s Guide
Processor (CPU) LED is RED
Processor has detected a fault condition.
• Contact Cabletron Systems Technical Support (refer to Getting Help in Chapter 1 ).
ASYNC Console Connection
Link (LNK) LED is OFF
There is normal console operation and no traffic on the interface.
Link (LNK) LED is RED or GREEN
The ASYNC port is connected for modem operation.
• Check the cabling and console connection pinout.
Link (LNK) LED is AMBER
There is traffic on the interface.
Status (STS) LED is OFF
The ASYNC port is disconnected or Data Carrier Detect (DCD) and Data Set Ready (DSR) are
inactive.
Status (STS) LED is AMBER
The console connection is detected. The Data Carrier Detect (DCD) is active, while the Data Set
Ready (DSR) is inactive.
• If the port does not function, check the cabling, console connection pinout, and VT
configuration.
Status (STS) LED is GREEN or GREEN (Blinking)
The ASYNC port is connected for modem operation. Data Set Ready (DSR) is Active.
• Check the cabling and console connection pinout.