Cabletron Systems HSIM-W6 - Manual (Page 180)

Chapter 7: General Configuration Using Local Management
166 HSIM-W6 User’s Guide
WAN Interface Configuration Screen
To access the WAN Interface Configuration screen shown in Figure 69 , use the arrow keys to
highlight the WAN INT CONFIG selection at the bottom of the WAN Physical Configuration
screen, then press ENTER.
Figure 69 WAN Interface Configuration Screen
WAN Interface Configuration Screen Fields
This section describes the WAN Interface Configuration screen fields.
Interface Number — Displays the active Interface Number. Use this field to configure the
Interface Numbers assigned on the WAN Physical Configuration screen.
Max Xmit Unit — User-configured field that displays the maximum packet size that can be
transmitted on the selected Interface. The default values are 8191 for PPP and 4095 for Frame
Relay.
WAN INTERFACE CONFIGURATION
RETURN SAVE
Interface Number: [002]
Max Xmit Unit: 0
Line Coding: [NONE]
Active Protocol: [NONE]
1484_04
Local Management Flash Image Version: xx.xx.xx
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
PT# IF# LID STATE
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
PT# IF# LID STATE
016
017 001 Enet UP
[xx-xxx]
PORTS: