Cabletron Systems HSIM-W6 - Manual (Page 132)

Chapter 7: General Configuration Using Local Management
118 HSIM-W6 User’s Guide
Table 21 describes the most common event messages. Event messages related to specific Local
Management applications are described with those applications throughout this manual.
Display Fields — Display fields cannot be edited. These fields may display information which
never changes, or changes as the result of Local Management operation, user selections, or
network monitoring information.
Input Fields — Input fields require keyboard characters to be entered. IP addresses, System Date,
and System Time are examples of Input fields.
Selection Fields — Selection fields provide a series of possible values. Only applicable values
appear in Selection fields.
Command Fields — Command fields are located at the bottom of Local Management screens.
Command fields are used to exit Local Management screens and to save Local Management
entries. Command fields perform a management action simply by being selected and activated.
Only command fields can make a change to a device’s configuration.
Table 21 Event Messages
Message Meaning
SAVED OK
One or more fields were modified
and saved to NVRAM.
NOT SAVED?--PRESS SAVE TO
KEEP CHANGES One or more fields were modified but
not yet saved to NVRAM.
NOTHING TO SAVE
The SAVE command was executed
but nothing was saved to NVRAM.