beautypg.com

Cabletron Systems HSIM-W6 User Manual

Page 201

background image

Chapter 8: MIB Navigator

HSIM-W6 User’s Guide 187

netstat:

Syntax:

netstat

Description:

The netstat command provides a display of general network statistics for
the managed device. The netstat command must be used with one of the
two display options.

Options:

-i

Displays status and capability information for each interface

-r

Displays routing information for each interface

Example:

ping:

Syntax:

ping [IP address]

Description:

The ping command generates an outbound ping request to check the
status (alive/not alive) of a device at a specified IP address.

Options:

Not Applicable

Example:

MIBNav-> netstat -i

Interface + Description

# 1 (ethernet -csmacd)
# 2 (ethernet - csmacd)
# 3 (ethernet - csmacd)
# 4 (ethernet - csmacd)

MTU

1514
1514
1514
1514

MAC Addr

0x00 0x00 0x1d 0x07 0x50 0x0e
0x00 0x00 0x1d 0x07 0x50 0x0f
0x00 0x00 0x1d 0x07 0x50 0x10
0x00 0x00 0x1d 0x07 0x50 0x11

Admin

up
up
up
up

MIBNav-> netstat -r

051470

Speed

10000000
10000000
10000000
10000000

Oper

up
up
up
up

Destination

# Default Route
# 134.141.0.0
# 134.141.0.0

Next-hop

DirectConnection
DirectConnection
DirectConnection

Interface

1
2
3

MIBNav-> ping 122.144.40.10

122.144.40.10 is alive

051471