Cabletron Systems HSIM-W6 User Manual
Page 109
![background image](/manuals/60684/109/background.png)
Chapter 6: HSIM-W6 Configuration with QuickSET
HSIM-W6 User’s Guide
95
To change the WAN frame type information, scroll through the list of interface entries and select
the interface number you wish to modify by clicking the arrow button on the left side of the
Interface # field and click the Modify... button. The WAN Frame Type window displays.
The WAN Frame Type window shown in
allows you to select one of three frame types
to be used over the WAN for each interface: Native WAN, Encapsulated Ethernet, and
Encapsulated Ethernet SNAP. Select the WAN Frame Type you wish to enable by clicking the
appropriate radio button. When you are done, click the OK button. The OK button returns you to
the Bridging and Routing (WAN Frame Type) Configuration window.
Figure 34
WAN Frame Type Configuration Window
Once the Bridging and Routing configuration is complete, click on the Next>> button in the
Bridging and Routing (WAN Frame Type) Configuration window and proceed to the
section of this guide.