Cabletron Systems HSIM-W6 - Manual (Page 205)

Chapter 8: MIB Navigator
HSIM-W6 User’s Guide 191
bridge:
Syntax: bridge
Description: Allows management of bridging upon one or more interfaces of the
device. Bridging may be enabled or disabled at your request, either one
at a time or all at once. Specifying a single interface number affects the
bridging status of that interface, while specifying ALL affects every
interface of the device.
Options: Enables or disables bridging.
Allows you to specify an interface number.
Example:
circuitmap:
Syntax: circuitmap -a
circuitmap -f
circuitmap -d
circuitmap -s
Description: Allows the user to view and/or modify a Protocol’s Circuit Map (i.e.,
address-to-circuit) table for the device. The -a option shows the user the
current HostMap information for the device. The -d option allows the
user to delete an entry from the table. The -s option allows the user to
insert a static entry into the table. The -f option allows the user to flush
the table. The device must be initialized after changing the Circuit Map.
Options: Not Applicable
MIBNav-> bridge disable all
bridge disable 1
bridge enable 1
bridge