Cabletron Systems HSIM-W6 - Manual (Page 240)

Chapter B: Specifications and Standards Compliance
226 HSIM-W6 User’s Guide
Individual WPIM Regulatory Compliance
The following sections provide regulatory compliance standards for the WPIM-TI, WPIM-SY,
WPIM-DDS, WPIM-E1, WPIM-DI, WPIM-S/T, and the WPIM-HDSL. Cabletron Systems
reserves the right to change these specifications at any time without notice.
WPIM-TI
This section describes the environmental specifications and safety and approval requirements for
the WPIM-T1.
Safety — This unit meets the safety requirements of UL 1950, and CSA C22.2 No. 950.
Electromagnetic Compatibility (EMC) — This unit meets the EMC requirements of FCC Part
15, VCCI V-3, and CSA108.8.
NEBS — This unit meets a minimum of Level 1 NEBS requirements in accordance with Bellcore
SR 3580.
TELECOM — FCC Part 68, CS-03.
WPIM-SY
This section describes the environmental specifications and safety and approval requirements for
the WPIM-SY.
Safety — This unit meets the safety requirements of UL1950, CSA C22.2 No. 950, EN 60950,
IEC 950, and 73/23/EEC.
EMI — This unit meets the EMI requirements of FCC Part 15, EN 55022, EN 50082-1, AS/NZS
3548, 89/336/EEC, CSA108.8, and VCCI V-3.
TELECOM — 91/263/EEC, and NET 2.