Using the menu screens – Cabletron Systems HSIM-W6 User Manual
Page 136
Chapter 7: General Configuration Using Local Management
122
HSIM-W6 User’s Guide
Using the Menu Screens
Once you have accessed the HSIM-W6 through a TELNET connection, the HSIM-W6 Password
screen, shown in
Figure 51
The HSIM-W6 Password Screen
Type in your password and press ENTER. If you are performing an initial configuration, the
default super-user access password is preset to “public”.
•
If you enter a valid password, the associated access level displays at the bottom of the screen
and the Main Menu screen, shown in
NOTE
See the instructions included with the TELNET application for information about
establishing a TELNET session.
NOTE
Your password is one of the community names specified in the SNMP Community
Names screen. Access to certain Local Management capabilities depends on the
degree of access accorded that community name. See the SNMP Community Names
section.
Local Management
CABLETRON Systems, Incorporated
P.O. Box 5005
Rochester, NH
03867-5005 USA
(603)
332-9400
(c) Copyright CABLETRON Systems, Inc. 19XX
Enter Password:
2012 01
Device Model Number:
Serial Number:
Functionality Level:
Flash Image Version:
BOOTPROM Version:
Board Revision:
XX.XX.XX
XX.XX.XX