Canon mx860 - Manual (Page 958)

Advanced Guide > About Network Communication > Changing and Confirming Network Settings > Monitoring Wireless
LAN Status
Monitoring Wireless LAN Status
Note
When using the printer over the Wired LAN, Signal Strength, Link Quality, or Advanced Measurement
is not available.
1. Start up the Canon IJ Network Tool.
Starting up Canon IJ Network Tool
2. Select the printer in Printers.
3. Select Status from the View menu.
1. Signal Strength
Indicates the strength of the signal received by the printer, ranging from 0% to 100%.
2. Link Quality
Indicates the signal quality excluding the noise while communicating, ranging from 0% to 100
%.
Important
If the indicated value is low, move your printer closer to the wireless network device.
3. Advanced Measurement
Click to examine the connection performance between the printer and the access point. Follow
the instructions on the screen to start measuring and display the status. Measurement takes a
few minutes.
When is displayed in Connection Performance between the Printer and the Access Point,
the printer can communicate with the access point. Otherwise, refer to displayed comments
and Help for improving the status of communication link.
Note
If any messages appear on Overall Network Performance, move the machine and access
point as instructed to improve the performance.
Page top
Page 958 of 997 pages Monitoring Wireless LAN Status