Loading paper in the cassette – Canon mx860 User Manual
Page 112
Advanced Guide
Troubleshooting
Contents
>
Loading Paper / Originals
>
Loading Paper
> Loading Paper in the Cassette
Loading Paper in the Cassette
Important
If you cut plain paper into small size such as 4" x 6" / 10 x 15 cm, 4" x 8" / 101.6 x 203.2 mm, 5" x 7"
/ 13 x 18 cm, or 2.16" x 3.58" / 55.0 x 91.0 mm (Card size) to perform trial print, it can cause paper
jams.
Note
You can load only A4, B5, A5, or Letter-sized plain paper in the Cassette. Load other sizes or types
of paper in the Rear Tray.
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see
Media Types You Can Use
.
You can use general copy paper.
For the page size and paper weight you can use for this machine, see
Media Types You Can Use
.
You can load only A4, B5, A5, or Letter-sized plain paper in the Cassette.
See
Media Types You Can Use
.
1.
Prepare paper for printing.
Align the loading paper. Flatten the four corners of paper before loading it.
Note
Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
If paper is curled, hold the curled corners and gently bend them in the opposite direction until
the paper becomes completely flat.
For details on how to flatten curled paper, refer to "
Troubleshooting
" in the on-screen manual:
Advanced Guide
.
2.
Load the paper.
(1)
Pull out the Casette from the machine.
(2)
Load the paper stack WITH THE PRINT SIDE FACING DOWN and THE
LEADING EDGE TO THE FAR SIDE, and align it against the right side of the
Cassette.
Page 112 of 997 pages
Loading Paper in the Cassette