Registering the printer – Canon mx860 User Manual
Page 769
Advanced Guide
>
About Bluetooth Communication
>
Printing Data via Bluetooth Communication
> Registering the Printer
Registering the Printer
Register the printer as a Bluetooth device using Bluetooth Devices under Control Panel.
Note
The following procedure is described assuming that Windows Vista has been installed in your
computer.
Before registering the printer on Bluetooth Devices under Control Panel, enable the Bluetooth
function of your computer.
For more information, refer to your computer's operation manual.
If you want to re-register the printer as a Bluetooth device, first delete the registered printer, and then
re-register it.
See
Deleting the Printer
.
1.
Log into a user account with the administrator privilege.
2.
Click Control Panel, then Bluetooth Devices under Hardware and Sound.
In non-Vista Windows, click Control Panel, Printers and Other Hardware, then Bluetooth Devices.
3.
Click Add on the Devices sheet.
Add Bluetooth Device Wizard will start.
4.
Make sure that the printer is turned on, check the My device is set up and ready to
be found check box and then click Next.
Page 769 of 997 pages
Registering the Printer