Canon mx860 - Manual (Page 104)

Advanced Guide Troubleshooting
Contents > Other Usages > Machine Settings
Machine Settings
This section describes the items you can set or change in Device settings of the Settings menu. For
details on setting or changing, refer to the on-screen manual:
Advanced Guide .
Plain paper feed settings
Selects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feeds
plain paper from the Cassette by default. Use this setting to change the paper source for plain
paper to the Rear Tray.
FAX settings
User settings
Configure the basic settings for faxing, such as auto print, date/time setting, unit name/telephone
number registration, volume control, telephone line selection, etc.
Transmission settings
Configure the basic settings for sending faxes, such as ECM transmission, pause time settings,
auto redial, fax number re-entry, etc.
Reception settings
Configure the basic settings for receiving faxes, such as ECM reception, fax priority mode, incoming
ring, fax reception reject, etc.
Print settings
Prevent paper abrasion
Use this setting only if the print surface becomes smudged.
Extended copy amount
Selects the amount of image that extends off the paper when making borderless copies.
LAN settings
Change wireless/wired
Switches between wireless LAN and wired LAN networks.
Wireless LAN settings
Configures the wireless LAN connection with WPS (Wi-Fi Protected Setup) or WCN (Windows
Connect Now). WCN setting is only available for Windows Vista.
For details, refer to the printed manual: Getting Started
.
Wireless LAN setting list
Displays the wireless LAN network configurations of the machine on the LCD.
LAN setting list
Displays the wired LAN network configurations of the machine on the LCD.
IPv4/IPv6 setting
Page 104 of 997 pages Machine Settings