Canon mx860 - Manual (Page 801)

XXX. XXX. XXX. XXX
Subnet mask XXX. XXX. XXX. XXX -
Subnet prefix length - XXX
Default gateway XXX. XXX. XXX. XXX XXX. XXX. XXX. XXX
MAC address XX:XX:XX:XX:XX:XX XX:XX:XX:XX:XX:XX
IPsec Settings - Active/Inactive
Security protocol - ESP/ESP & AH/AH
Pre-shared key - XXXXXXXXXXX
("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
IPv4/IPv6 setting
Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
WSD setting
Activates/inactivates the WSD (one of the network protocols supported in Windows Vista) setting.
Note
When you set WSD setting to Enable, the printer icon is displayed on the Network Explorer in
Windows Vista.
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out, refer to Printing Out Network
Setting Information .
Important
This print out contains valuable information about your computer. Handle it with care.
Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or scanning
operation may become impossible. To use the machine over network, refer to your setup
manual. Be careful when you initialize the network settings on the machine.
Note
When you initialize the network settings using the Canon IJ Network Tool, refer to Initializing the
Network Settings of the Machine .
Page top
Page 801 of 997 pages LAN settings