Rejecting fax reception – Canon mx860 User Manual
Page 700
Advanced Guide
>
Faxing
>
Sending/Receiving Faxes Using the Operation Panel of the Machine
> Rejecting Fax
Reception
Rejecting Fax Reception
You can set the machine to reject faxes with no sender information or those from specific senders.
Select one of the following conditions to reject faxes.
Faxes with no caller identification.
Faxes from senders not registered to the one-touch speed dial codes
(MX860 series) or the coded speed dial codes.
Faxes from senders registered in the machine as rejected numbers.
1.
Press the
FAX
button, then press the
Menu
button.
The FAX menu screen is displayed.
2.
Use the
button to select
Settings, then press the
OK
button.
3.
Use the
button to select
Device settings, then press the
OK
button.
4.
Use the
button to select FAX settings, then press the
OK
button.
5.
Use the
button to select Reception settings, then press the
OK
button.
6.
Use the
button to select Fax reception reject, then press the
OK
button.
7.
Use the
button to select ON, then press the
OK
button.
8.
Use the
button to select the fax rejection condition, then press the
OK
button.
You can select one of the three conditions below.
Page 700 of 997 pages
Rejecting Fax Reception