Canon mx860 - Manual (Page 60)

Advanced Guide Troubleshooting
Contents > Scanning > Saving Scanned Data
Saving Scanned Data
This section describes the operation to detect the type of original on the Platen Glass or in the ADF
automatically with Auto detect, and save it on a computer connecting with the USB cable or via a network.
For other operations to save scanned data on the USB flash drive or to scan originals with a computer,
refer to the on-screen manual:
Advanced Guide .
Important
Please note that Canon shall not be liable for any damage or loss of the data for any reason
whatsoever, even within the warranty period of the machine.
Note
The machine can detect the types of original with Auto detect: photo, Hagaki, business card,
magazine, newspaper, text document, and DVD/CD. For other originals, select the type of originals
to scan them.
Preparing for scanning with the Operation Panel
Before scanning images, confirm the following:
Are the necessary software (MP Drivers and MP Navigator EX)
installed?
If the software is not yet installed, refer to the printed manual: Getting Started .
Does the original to be scanned meet the requirements for an original
to be set on the Platen Glass or in the ADF?
For details, see Originals You Can Load .
If the machine is connected via USB or wired LAN
Confirm that the connection with USB cable or LAN cable between the machine and the computer is
physically secure.
Important
Do not insert or remove USB cable or LAN cable when scanning images with the machine, or
when the computer is in sleep or standby mode.
If the machine is connected over a network
When you use a computer connected over a network, confirm the following:
Is the Canon IJ Network Scan Utility installed?
If the software is not yet installed, refer to the printed manual: Getting Started .
Is the machine selected in the settings screen of the Canon IJ Network
Scan Utility?
For details on the setting procedure, refer to the on-screen manual: Advanced Guide .
Is the Canon IJ Network Scan Utility running?
For details, see " Troubleshooting " in the on-screen manual: Advanced Guide .
Note
If you do not intend to send scanned images to a computer over a network with the Operation
Panel on the machine, you do not need to use the Canon IJ Network Scan Utility.
If you are using Mac OS X v.10.3.9
You need to set MP Navigator EX as the starting application software in Image Capture under
Applications of Mac OS X.
Page 60 of 997 pages Saving Scanned Data