Canon mx860 - Manual (Page 797)

be sent/received in the standard mode.
ECM reception can be disabled.
Fax priority mode
Specifies the detailed settings when Receive mode settings is set to Fax priority mode.
Receiving Faxes
Ring start time
Specifies the length of time, in seconds, to allow the machine to judge whether an
incoming call is a fax or a voice call.
Telephone ring time
Specifies the length of time, in seconds, that the machine rings for a voice call.
Default action
Sets whether to receive the fax after the specified ring time has elapsed.
DRPD: Fax ring pattern
Sets the distinctive ring pattern of a call that the machine assumes is a fax call. If you
subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your
telephone company.
You can select the ring pattern from Normal ring, Double ring, Short-short-long, Short-long-
short, and Other ring type.
Setting the Receive Mode
This setting is available only in the US and Canada.
Incoming ring
MX860 series
Selects whether to allow the external device to ring when the receive mode is set to Fax only
mode or Fax priority mode.
Using Various Receiving Functions
If you select ON, you can specify the number of times the external device rings.
MX330 series
Specifies the number of times the external device rings when the receive mode is set to Fax
only mode or Fax priority mode.
Using Various Receiving Functions
Manual/auto switch
Sets whether to automatically receive faxes after the external device rang a specified length of
time when Receive mode settings is set to TEL priority mode.
Receiving Faxes
If you select ON, you can specify the length of time until automatic reception is started.
Remote RX
Enables/disables remote reception.
Remote Reception
If you select ON, you can specify the remote reception ID.
RX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
If you select ON, you can select the image reduction direction.
RX start speed
Selects the fax reception speed.
RX report
Sets whether to print a reception report after each reception.
RX Report
Fax reception reject
If you select ON, the machine rejects the reception of faxes with no sender information or
faxes from specific senders.
Rejecting Fax Reception
No sender info.*
Page 797 of 997 pages FAX settings