Canon mx860 - Manual (Page 27)

Advanced Guide Troubleshooting
Contents > Setting Up the Machine > Specifying the Basic Settings for the Machine > Entering the Date and Time
Entering the Date and Time
Note
Three date display formats are available: YYYY/MM/DD, MM/DD/YYYY, and DD/MM/YYYY.
For details, refer to the on-screen manual: Advanced Guide .
When the machine is connected to a computer with the MP Drivers installed, the date and time
setting will be copied from the computer to the machine. As long as the date and time is set
accurately on your computer, you do not need to set it on the machine.
If you disconnect the power plug or when there is a power failure, the date and time setting on the
machine will be reset. When you connect the machine to a computer with the MP Drivers installed,
the setting will be copied to the machine once again.
1.
Display the Date/time setting screen.
(1) Press the FAX button, and press the Menu button.
(2) Use the (Left) or (Right) button to select Settings , and press the OK
button.
(3) Use the (Left) or (Right) button to select Device settings , and press the
OK button.
(4) Use the (Up) or (Down) button to select FAX settings, and press the OK
button.
(5) Use the (Up) or (Down) button to select User settings, and press the OK
button.
(6) Use the (Up) or (Down) button to select Date/time setting, and press the
OK button.
2.
Enter the date and time.
(1) Use the Numeric buttons to enter the date and time (in 24-hour format).
Enter only the last two digits of the year.
Note
You can also use the (Up) or (Down) button to change the number.
If you misentered the date and time, press the (Left) or (Right) button to move the
cursor under the number to enter the correct number.
(2) Press the OK button.
3.
Return to the fax standby screen.
(1) Press the FAX button.
Page 27 of 997 pages Entering the Date and Time