ADS Environmental Services FlowShark QR 775003 A2 - Manual (Page 64)

Sensor Installation and Connection 3-7
Quantity Description ADS Part Number
1 IS Doppler Velocity Sensor with two 4-40 x
5/16-inch stainless steel screws
106194A–35 (ft)
as needed IS Velocity Sensor Extension Cable 106135A–xxx 2
1 IS Pressure Depth Sensor (0 – 5 psi) with two
4-40 x 5/16-inch stainless steel screws
3754-0001–40 3 (ft)
as needed IS Pressure Depth Sensor Extension Cable 106136A–xxx 2
1 replacement dryer tube 3704–0032
1 IS PC Communication Direct Connection Cable 106228A Rev H5
as needed EMU Serial Cable 3800–0147
15 ¼- × 2 ¼-inch stainless steel anchor bolts I01–0002
1 3/8-inch x 3-inch anchor bolt and nut I01–0003
2 3/8-inch x 1-inch stainless steel hex bolts I01–0001
4 3/8 – 16 stainless steel hex nuts I15–0002
5 3/8-inch stainless steel flat washers I55–0001
1 3/8-inch x 2-inch studs I01–0009
15 plastic push mounts I01–0006
15 11-inch cable ties I05–0003
25 4-inch cable ties I05–0001
15 8-inch cable ties I05–0002
15 anchor cable ties I05–0004
1 stainless steel ring (sized for pipe) I25–0081 to 0094
4
1 spreader assembly I10-0003
1 18-inch stainless steel crank handle I10–0012
1 Additional models of the FlowShark IS monitor are also available: 5000-IS1-US
(without internal battery), 5000-IS1 (for EU without internal battery), and 5000-IS1-
01 (for EU, with internal battery).
2 Extension cables can be ordered in specific lengths up to 300 feet. Note the desired
length (in feet) in the xxx portion of the part number. For example, if the application
requires a 50-foot extension cable for an IS ultrasonic sensor, the part number would
be 106137A–050.
3 IS pressure depth sensors are also available in 0–15 psi (p/n 3754–0002–40) and 0–
30 psi (p/n 3754–0003–40).