ADS Environmental Services FlowShark QR 775003 A2 - Manual (Page 160)

Configuration and Activation 6-31
 Click on the Close button to exit the Velocity 1 device
dialog and return to the Monitor Diagnostics dialog.
5. (applies only to the Pressure Device) Run diagnostics on the
pressure
device in the following way:
 Select the Pressure 1 device from the Diagnose Device
drop-down list, and then click on the Diagnose button.
The Diagnostics dialog displays the current configuration
parameters stored in the LIF for the Pressure 1 device.
Diagnostics dialog for the Pressure 1 device
 Click on the Fire button.
The Results section displays the current depth and temperature
readings measured by the pressure depth sensor.