ADS Environmental Services FlowShark QR 775003 A2 - Manual (Page 156)

Configuration and Activation 6-27
2. Click on the Connect button to establish communication with
the monitor.
Profile initiates communication with the monitor and
establishes a connection.
3. (applies only to the Ultrasonic Device) Run diagnostics on the
ultrasonic
device in the following way:
 Select the Ultrasonic 1 device from the Diagnose Device
drop-down list, and then click on the Diagnose button.
The Diagnostics dialog displays the current configuration
parameters stored in the LIF for the Ultrasonic 1 device.
Diagnostics dialog for the Ultrasonic 1 device
 Click on the Fire button.
The Results section displays the current depth and temperature
readings measured by the ultrasonic depth sensor.