ADS Environmental Services FlowShark QR 775003 A2 - Manual (Page 152)

Configuration and Activation 6-23
an external power source, below which you want Profile to
provide notification for the FlowShark IS monitor. ADS
recommends leaving the default battery voltage
unchanged.
 Low Battery FlowShark IS External Enter the
voltage supplied from the external power source powering
the wireless modem in the EMU and the monitor (when
applicable) below which you want Profile to provide
notification for the FlowShark IS monitor. ADS
recommends leaving the default battery voltage
unchanged.
Note:
Notification of low battery voltage or signal
strength occurs during the data collection process, during
monitor activation, and when receiving TCP/IP
communication status. View the associated logs through
the Diagnostics tool and Log Viewer in the Profile
software.
 Low Battery FlowAlert/RainAlert II (This parameter
does not apply to the FlowShark IS flow monitor.
)
 Low Battery Triton/FlowHawk (This parameter does
not apply to the FlowShark IS flow monitor.
)
4. Click on the OK button.