ADS Environmental Services FlowShark QR 775003 A2 - Manual (Page 121)

4-18 ADS FlowShark IS Manual
Direct connection using the IS PC communication cable
3. Use the Profile software to establish communication with the
monitor.
Note: If your computer only has a USB port and no serial
port, use a USB-to-Serial adapter cable (and driver
software) to perform serial communications. ADS
recommends using one of the following USB adapters:
Dynex model DX-UBDB9 or Keyspan model USA-19S.
Refer to the Profile User's Guide (#950015**) for using the Profile
software to designate the appropriate local port for serial
communication.
Connecting to the Monitor through the EMU
Serial Cable
Communicating with the monitor without physically accessing the
monitor is possible through the EMU using the EMU Serial Cable
(ADS p/n 3800-0147). This requires opening the EMU and
connecting the laptop to the Reset PCB using the EMU serial cable.
Note:
The EMU must be powered for this type of
connection, but the modem does not have to be installed or
turned on.