Banner PresencePLUS P4 COLOR Series - Manual (Page 57)

Comments Optional
Qualifiers Required
Qualifiers Support Actions Object or
Activity
Identifier System Object,
Component, or
Activity
Get the camera
exposure None Positive Number SET EXPOSURE Exposure
Enables frame
number as None ENABLE SET FRAMETAG Frame Number
Tag
command
acceptance
indicator
Disables frame
number as None DISABLE SET FRAMETAG Frame Number
Tag
command
acceptance
indicator
Retrieve the status
of the frame tag
indicator None None GET FRAMETAG Frame Number
Tag
Coordinate tool
Commands
Description Syntax
Returns the specified Coordinate tool output. set coordtool tool_name|tool_number x\y|angle
Gets the value get coordtool tool_name|tool_number x\y|angle
Math tool and the Remote Command Channel
Commands
Description Syntax
Sets the specified tool operand, if it is a constant.
Value should be a floating number. set mathtool tool_name|tool_number value operand_1|operand_2
Gets the value of the specified tool operand, if it
is a constant. get mathtool tool_name|tool_number operand_1|operand_2
String tool
Commands
Description Syntax
Sets the specified tool operand, if it is a constant.
Value should be a quoted string (see
Character
Strings on page 327).
set stringtool tool_name|tool_number operand_1|operand_2 value
Gets the value of the specified tool operand, if it
is a constant. get stringtool tool_name|tool_number operand_1|operand_2
57 Minneapolis, MN USA Banner Engineering Corp.
System Setup Dialog 2/2010