Banner PresencePLUS P4 COLOR Series - Manual (Page 156)

BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI
Color ProII/ProII
1.3 ProII Color
No No No No Yes Yes Yes Yes
Line Detect Tool Input Tab
Adding an Line Detect Tool
1. Click the button of the tool to be added to the inspection.
2. If desired, rename the tool.
3. Draw an ROI.
Description Field/Button
Use this field to rename the tool. The default is tool_name_1, tool_name_2, and
so on, where the default tool_name depends on the tool being created (for example,
locate, edge or the like). The name can have only alphanumeric characters and
underscores with no spaces.
Banner Engineering Corp. Minneapolis, MN USA 156
2/2010 PresencePLUS Software Tools