Banner PresencePLUS P4 COLOR Series - Manual (Page 244)

set ocvtool 2 "foobar"
To get the constant of the second ocvtool, issue the following command:
get ocvtool my_ocv_tool_2
Get Command Example
or
get ocvtool 2
7.6 Analysis Tools
Analysis tools analyze the information gathered with the Vision tools to create measurements and tolerances for the
Vision tools.
Analysis Tools
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI
Color ProII/ProII
1.3 ProII
Color Location
Tools
No No No No Yes Yes Yes Yes Coordinate
Tool
on
page 259
Yes Yes Yes Yes Yes Yes Yes Yes Communication
Tool
on
page 244
Yes Yes Yes Yes Yes Yes Yes Yes Math Tool
on page 263
Yes Yes Yes Yes Yes Yes Yes Yes Measure
Tool
on
page 268
Yes No No No Yes Yes Yes Yes String Tool
on page 290
Yes Yes Yes Yes Yes Yes Yes Yes Test Tool
on page 297
7.6.1 Communication Tool
The Communication tool is used to conditionally export data from the Sensor to an external device. Results from
Vision tools can be selected by the Communication tool and exported to an external device. The Sensor can export
data over the Ethernet or via its serial channels.
Examples of exported results
• Execution times
• Whole-number counts
• Input and output values from a Test tool
• Success from Locate and Test tools
• Reference point-to-edge and rotation distances
Fields
Banner Engineering Corp. Minneapolis, MN USA 244
2/2010 PresencePLUS Software Tools