Banner PresencePLUS P4 COLOR Series - Manual (Page 269)

Measure Tool Input Tab
Measure Tool Operations
Measure from a Point to a Point
In this operation, the distance between two points is calculated. In addition, the X and Y components of that distance
calculation are returned.
Along with distance, the following results are generated in this operation:
• A line from point 1 to point 2
• The angle of that line (relative to the x-axis)
• The midpoint of point 1 and point 2
Intersect Two Lines
In this operation, the results of the intersection of two lines is generated. These results are:
• The angle of intersection between the two lines, measure from line 1 to line 2.
• The intersection point
269 Minneapolis, MN USA Banner Engineering Corp.
PresencePLUS Software Tools 2/2010