Banner Tubular Fluorescent Lights User Manual
Hffw.. high-frequency tubular fluorescent lighting, Models
Sealed fluorescent lights, 8" to 48" tube lengths, ac and dc powered
• Electronic ballast increases lamp frequency and eliminates strobe effect
• Models available with built-in or external ballast. External ballast models provide
shorter, more compact light housing.
• Ideal for illuminating hard-to-reach areas
• Parabolic louver extends the full length of the light opening; reduces glare.
• All models include built-in mounting brackets and a 2.5 m (8') integral cable
• Acrylic tube and strain-relief cable gland for use in wet environments
• IEC IP67 enclosure rating, exceeds NEMA 4X
Built-in ballast models shown
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This product does NOT include the self-checking redundant circuitry neces-
sary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either
an energized or de-energized sensor output condition.
Models
Model
Bulb
Length
Ballast Type Connection
Supply Voltage
Bulb Wat-
tage
HFFW8DC
8"
Built-In Elec-
tronic Ballast
3-conductor, 2.5 m (8') integral cable, untermi-
nated
24V dc
18 W
HFFW12DC
12"
24 W
HFFW14DC
14"
36 W
HFFW8AC110
8"
3-conductor, 2.5 m (8') integral cable with
male plug
100–120V ac
18 W
HFFW15AC110
15"
120V ac
36 W
HFFW12AC
12"
120–277V ac
24 W
HFFW24AC
24"
17 W
HFFW36AC
36"
25 W
HFFW48AC
48"
32 W
HFFW8AC230
8"
100–230V ac
18 W
HFFW15AC230
15"
230V ac
36 W
HFFW8ACR
8"
External Bal-
last
3-conductor, 2.5 m (8') integral cable, untermi-
nated (light to ballast) plus 3-conductor, 2.5 m
(8') cable with male 3-prong plug (ballast to
power source) See wiring.
120–277V ac
18 W
HFFW12ACR
12"
24 W
HFFW15ACR
15"
36 W
HFFW24ACR
24"
17 W
HFFW.. High-Frequency Tubular Fluorescent Lighting
P/N 115387 rev. D
9/7/2012
0 115387
3