Banner PresencePLUS Lighting - Manual

®
LED..A80X80M Series Area Lights
Area Lights for use with PresencePLUS ® P4 Sensors
Printed in USA 03/04 P/N 116949
Features
• Lightly diffused area light for PresencePLUS® P4 sensors. See Banner’s website at
www.bannerengineering.com for a complete lighting tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED light source
• Direct connection to PresencePLUS P4 sensor (if sensor is powered by 24V dc)
• Two available bracket options
Light Source LED; see Models table above for wave lengths
Illumination Lightly diffused, high-intensity area light
Infrared model: At a 24" distance, illuminates an 8" diameter area within 60% of the center intensity.
Visible LED models: At a 12" distance, illuminates a 4" diameter area within 50% of the center intensity.
Supply Voltage and Current 24V dc @ 250 mA max.
Voltage supplied by PresencePLUS P4 sensors, if operating at 24V dc (see sensor manual).
Connections 2 m (6.5') pigtail with 3-wire, 8 mm male Pico-style connector
Construction Low-carbon steel with black zinc plating, acrylic window
Useful Life 10,000 hours (LED ON time). When operated within specifications, output will decrease less than 30%
after 10,000 hours and less than 40% after 20,000 hours.
Operating Conditions Temperature: 0° to +50°C (+32° to 122°F)
Relative humidity: 90% at 50°C (non-condensing) max.
Cleaning Instructions Regularly remove any dust, dirt, or fingerprints from the light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use
any other chemicals for cleaning.
Specifications
Models LED Color Wave Length
LEDIA80X80M Infrared 850 nm
LEDRA80X80M Visible Red 660 nm
LEDWA80X80M White All Visible
LEDBA80X80M Blue 470 nm
LEDGA80X80M Green 525 nm
Models