Banner PresencePLUS P4 COLOR Series - Manual (Page 243)

Note: When the tool times out, it may have decoded part of the string before the time ran out. This partial decoding
is reported back as the Decoded String. In OCV, whenever a timeout occurs, it is considered NO MATCH even
if the returned Decoded String matched Expected String.
7.5.11 OCV Tool and the Remote Command Channel
Commands
Description Syntax
Sets the expected string, if it is a constant. The
Value should be a quoted string containing set ocvtool tool_name|tool_number exp_string value
printable ASCII characters (see Character Strings
on page 327).
Gets the value of the exptected string. get ocvtool tool_name|tool_number exp_string
Examples
Assuming that you have two OCV tools, my_ocv_tool_1 and my_ocv_tool_2, each with
their first operand configured as a constant. To set the constant of the second ocvtool to
foobar, issue the following command:
set ocvtool my_ocv_tool_2 "foobar"
Set Command Example
or
243 Minneapolis, MN USA Banner Engineering Corp.
PresencePLUS Software Tools 2/2010