Banner LED Spot Lights - Manual

LED Spot Lights for Use with PresencePLUS® P4 Sensors
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineer-
ing.com .
• Low-cost, compact washdown spot lights for PresencePLUS® sensors.
See Banner’s Web site ( www.bannerengineering.com ) for a complete light-
ing tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED; adjustable spot size (see
Specifications on page 1).
• Direct connection to PresencePLUS P4
• Standard 1/4 - 20 thread mounting hole, compatible with camera mounting
bracket knuckle.
Models
Model Color Ambient Light Filter Kit
LEDRSM Visible Red, 620-630 nm FLTR
LEDWSM Cool White, 5500-8300 K FLTB or FLTG
LEDBSM Blue, 465-485 nm FLTB
LEDGSM Green, 520-535 nm FLTG
Specifications
Light Source
LED; see Models table for wavelengths
Illumination
High-intensity spot light
Supply Voltage and Current
Voltage supplied by PresencePLUS sensor: 10-30V dc
@360mA max.
Connections
2 m (6.5') attached pigtail with 3-wire, 8 mm Pico-style
connector
Construction
Black anodized aluminum, glass lens
Environmental Rating
IEC IP67
Useful Life
50,000 hours (LED ON time). When operated within
specification, output will decrease less than 30% after
50,000 hours.
Operating Conditions
-40° to +50° C ( -40° to +122° F)
90% @ 50° C (non-condensing) max. rel. humidity
Cleaning Instructions
Regularly remove any dust, dirt, or fingerprints from the
light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or
window cleaner to wipe off remaining debris. Do
not use any other chemicals for cleaning.
Spot Size Relative to Distance
Distance 152 mm (6") 305 mm (12")
Spot Size 76.2 mm (3") min. 178 mm (7") max. 127 mm (5") min. 305 mm (12") max.
LED..SM Series Spot Lights
P/N 122986 rev. C 2/25/2011
0 122986 8