Rockwell Automation 2093-xxxx Kinetix 2000 Multi-axis Servo Drive User Manual - Manual (Page 55)

Publication 2093-UM001A-EN-P — March 2007
Kinetix 2000 Connector Data 55
Brake Relay Circuit
(1) Noise suppression device.
Brake Relay Output Specifications
Control Power Input
The integrated axis module (IAM) requires ac input power for logic circuitry.
Control Power Current Specifications
Control Power Current Requirements
PWR
(BC-1)
BRK-
(BC-3)
BRK+
(BC-2)
COM
(BC-4)
(1)
Kinetix 2000 IAM/AM
Parameter Description IAM/AM Max
On-state current (1)
(1) For motors requiring more than the maximum current specified, an external relay must be added. Refer to the
Wiring Example for External Brake Relay Control of Motor Brake on page 182 for a diagram of this circuit.
Current flow when the
relay is closed
2093-AC05-MPx
1.0 A 2093-AMPxx
2093-AMxx
On-state resistance Contact resistance when the relay is closed 1 Ω
Off-state voltage Voltage across the contacts when the relay is open 30V
IMPORTANT
For CE certification, the control power input requires an ac line filter
that provides electromagnetic compatibility (EMC). For wiring
examples, refer to Power Wiring Examples beginning on page 169.
IMPORTANT
Source 2093-AC05-MPx (230V) IAM control power from the
three-phase input power (line-to-line). Supplying 230V control power
from any other source requires an isolation transformer. If used, do
not ground either leg of the isolation transformer output.
Refer to Transformer Specifications for Control Power Input on page
159.
Attribute Value
Input voltage
170...264V ac rms,
single-phase or three-phase
Input power frequency 47...63 Hz