Rockwell Automation 1398-DDM-xxx ULTRA 100 Series Drives Installation Manual - Manual (Page 240)

Publication 1398-5.2 – PDF 1997
C-8 TouchPad Instructions
●
A filled arrow, , in the most significant digit indicates the active
setting from a list of possible settings. Inactive settings are
indicated by a unfilled arrow,
.
For example: If the drive is functioning as Preset Controller in the
Velocity mode, pressing the
key from DRVPARAM scrolls
through the CmdSrc list which includes Presets , AuxEnc ,
StepDir , StepU/D , and Analog .
●
The Mode/Enter, , key selects a parameter from the list.
●
List selections that are undefined are indicated by Unknown .
This display indicates the TouchPad data table is incompatible
with the drive.
Lists are associated with all parameters, except DISPLAY and
DRVINFO . Refer to the tables beginning on page C-16 for the items in
each list. Table C.17, “Drive Status List for TouchPad” on page C-19
is a read-only list, all other lists contain possible parameter selections.
After an option is selected, the display reverts to the parameter from
which the option was selected. For example: Selection of the
EncAlign parameter under STATUS provides the options
Normal
and Align. Selection of either option returns you to the EncAlign
display.
Ratio
A FolRatio (gear ratio) longer than eight characters may require
scrolling with the and keys. The ratios are numeric values that
increment or decrement by 1 each time the , or , key is pressed.
The method of display is dependent on the length of the ratios:
●
If the ratio is eight characters or less, the complete ratio is
displayed.
For example, a Master to Follower ratio of one-thousand to nine-
hundred is displayed as
1000:900 .
●
If the ratio requires more than eight characters the ratio is
displayed in two parts: a Master Ratio and a Follower Ratio. The
position of the colon (:) after or before each numeric value
indicates Master or Follower for these larger ratios.
The
and keys toggle between the Master Ratio and the
Follower Ratio.
For example: A Master to Follower ratio on 1001:1000 is
displayed in two separate displays. The Master Ratio is displayed
as
1001: and pressing displays the Follower Ratio :1000 .
Fault/Error/Warning
C.1lists the possible fault, error and warning messages that may
appear on the TouchPad. The items below describe the different types
of messages.