Basic modals, 1 manual d a ta input (mdi) – ACU-RITE CNC 3500i User Manual
Page 80
54
3 Manual Data Input
3.1 Manual D
a
ta Input (MDI)
Basic Modals
Basic Modals allow the operator to set some of the basic modals for
the system. In this dialog, the operator is allowed to adjust the current
modal settings of the system (plane, absolute/incremental, inch/mm
and rapid/feed mode).
Touch the Basic Modals Location zone.
The Basic Modals dialogue opens.
Adjust the current modal settings of the system by touching on
fields that require adjustment.
Touch Use to enter the changes, or press Cancel to exit without
making any changes.
When the Use button has been selected, the operator will be
prompted to “Press Start to run operation or Manual to cancel”.
Press the Start button to execute the change, or:
Touch the Manual button to cancel all changes.