ACU-RITE CNC 3500i - Manual (Page 114)

88 5 Program Management
5.1 Pr
ogr
am Manag
e
ment Intr
oduction
5.1 Program Management
Introduction
Accessing Program Management
The Program Management mode provides access to all of the
program utilities. These functions include creating, selecting, editing,
deleting, and copying programs. The Program Management also
provides access to network or USB memory devices.
 To activate the programming display touch the
Program Management button in the top menu bar.
The Program Manager's User’s listing lists the programs stored in the
CNC. All CNC programs are displayed by their extensions after its
name. Change the Program Type mode to view programs with other
formats.
Program Screen Description
The following is a map of the Program Management screen.
The folder where the user programs are stored is
V:\USER. All programs should be created and saved in this
folder. Additional folders can be created in V:\USER to
better organize programs. Do not delete or alter programs
or folders outside of V:\USER. Some programs and folders
outside of V:\USER may be needed for normal operation
of the CNC.
1 Current folder
2 Folder list
3 Program list
4 Program To Run
5 Showing button to filter Program Types shown. This is used to
show only the extension type programs to display.
6 Horizontal menu bar buttons
7 Vertical menu bar buttons
8 Scroll Bar