ACU-RITE CNC 3500i - Manual (Page 188)

162 7 Programming: Canned Cycles, sub-programs
7.
2 Canned Cy
cles
 G-code format: G170
Field Code Description
XStart D X coordinate of the starting point. Defaults
to current position.
NOTE: Type the required absolute X Start
and Y Start coordinates when possible.
YStart E Y coordinate of the starting point. Defaults
to current position.
NOTE: Type the required absolute X Start
and Y Start coordinates when possible.
Enter either an X Stepover or Y Stepover. Do not enter
both.