Endmill cycle, 2 canned cy cles – ACU-RITE CNC 3500i User Manual
Page 186

160
7 Programming: Canned Cycles, sub-programs
7.
2 Canned Cy
cles
EndMill Cycle
The mill cycle is terminated with the EndMill block; at which point,
it rapids up to the StartHgt and rapids to the X and Y location
specified. If X and Y are not specified the tool remains in the current
position.
G-code format: G176
Field
Code
Description
X
X
X ending point. Default: Current position.
Y
Y
Y ending point. Default: Current position.
Type
Q
Specifies the type of exit move;
1=Line Tangent, 2=Line Perpendicular,
3=Arc Tangent, 4=Line Arc Tangent.
Length
M
Length of exit move.
Radius
R
Radius of exit arc.
Angle
C
Angle of exit arc.