ACU-RITE CNC 3500i - Manual (Page 386)

360 11 G-Code Edit, Help, & Advanced Features
1
1
.1 G-Code Pr
ogr
a
m Editing
Moving Blocks in a program
Moving one or more blocks is accomplished by using the Cut button.
 In Edit Mode, place the cursor at the beginning of the
first of one, or more blocks to be moved, then touch
the Edit Features button.
 Touch the Mark button. Use the Arrow keys to mark
additional blocks below, or above the cursor location.
 Touch the Cut button to remove the block, or blocks
selected, and place them on the clipboard.
 Place the cursor at the beginning of a block where the
blocks are to be inserted, and touch the Insert Block
button.
 With the cursor at the beginning of the new empty
block line, touch the Paste button to move the
selected blocks to the new location.
Canceling edits to a program block:
Using the Undo button sequentially steps backwards undoing all
previous steps.
 Touch the Undo button to undo one or more recent
actions taken in sequential reverse order.
 Continue touching the Undo button will continue to remove recent
actions taken in sequential reverse order.
Restore edits to a program block:
Using the redo button to reverse edits made to a program and restore
the block(s) to its edited form.
 Touch the Redo button to redo one or more recent
undo.
 Continuing to touch the Redo button will continue to redo recent
undo.