ACU-RITE CNC 3500i - Manual (Page 334)

308 10 CAM: Programming
1
0
.1 CAM Pr
ogr
a
mming
Setup tab:
 Tool: Enter the tool number to use for the cycle.
 Feed: Enter the feed rate used while engraving.
 Coolant: Choose None, On (M8), Off (M9), or Mist (M7). See
"Coolant" on page 292.
 Spindle Dir: Choose Forward, Reverse, Off or None. See "Spindle
Direction" on page 292.
 Spindle Speed: Enter the spindle speed.
Comment tab:
 Add a comment if needed that will be placed in program. See
sample "Comment tab:" on page 300.
Program Directive
The Program Directive Tool enables you to add any programming
code, notes or comments.
Adding a Program Directive
 Select the Add Directive button.
 Enter code or text into the Add Directive dialogue. Text requires a
“
∗
” before the text (for a comment).
 Touch on the Use button to add the directive to the tool path
sequence.